Ricoh IM C6500 Instructions
Basic information:
-
Add each printer following the standard procedure for network printers using these IP addresses:
- Left printer: 10.97.101.68
- Right printer: 10.97.101.67
- Printers can be used without a driver as generic network printers added by IP address. In this mode, some advanced features (such as stapling) are not available.
- With drivers installed, most print features are available directly from the print dialog.
Drivers:
- Drivers are available for download here: https://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc6500/imc6500.htm
Print/Scan via USB:
- Each machine has a USB-A port on the lefthand side of the screen.
- USB sticks should be formatted as FAT 32 drives. Some other formats can also be read, but are more prone to corrupting files or other errors.
- Remember to take your drive with you when you’re done!
Tips, Tricks, & Troubleshooting:
- Large print/copy jobs:
- we tend to find that large photocopy jobs are less prone to paper jams and errors than printing jobs, so we recommend printing a “master” of your document and photocopying that.
- please be considerate of others needs (especially during the school year). when printing large jobs refrain from using both machines and/or work in smaller batches to avoid tying up both machines for extended periods of time.
- Refilling paper:
- 8.5” x 11” copy paper is located in the cabinet below the counter directly to the right of the right machine.
- Tray 1 for each machine can accommodate 2 stacks of paper, each of which is optimized for 2 full reams. You can fit more paper in, but it significantly increases the frequency of jams and misfeeds.
- You can refill the left “reserve” caddy in Tray 1 without stopping the machine’s operation. This is especially handy when working on large jobs.
- Trays 2 and 3 are used for non-standard paper sizes.
- Printing when idle – if you send a print job while the machine is idle, it may not start processing the job until it wakes up which can give the impression that the job was not received and often leads people to double-print. You can confirm if your job is in the print queue in the check status menu.
